Table of Contents
Linksys WAG160N
The Linksys WAG160N is an ADSL gateway with wireless acccess point (b/g/n) and 4 port switch integrated. It runs Linux out of the box. The source code tarball is available from the Linksys GPL Code Center
Specifications
ADSL2/2+ support
4 port switch
Wireless 802.11b/g/n
The unit comes with two internal antennas.
Hardware
Platform: ?
SoC: ?
Processor: ?
4 port switch: ?
Wireless chipset: Atheros AR5008 series
Expansions: ?
Ram: EM6AA160TS-5G (16 MB)
Internal Front:
Left top corner S2 Right bottom corner J10
Internal Back:
Left top corner J1
Serial console Serial console can be plugged to J10: connector lacks, it has to be soldered on the board.
Position on board and pinout:
Legend (in arrow direction): 1 GND 2 Tx 3 VCC (3,3V) 4 RX
Interface
You cannot plug directly those pins to your pc serial port. You need a RS232-TTL 3,3V level adapter (e.g. MAX3232).
See Serial_Console
Terminal
Configuration: (?)
38400 bauds, 8 bits, no parity, 1 stop bit (38400 8N1)
JTAG
Jtag pins are located maybe in J1, but the connector lacks.
Legend: ?
- Category80211nDevice
- CategoryNotSupported
