| Version/Model | Launch Date | S/N | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|---|
| v1 | 2009-01 | - | no | similar to 7270 V2 |
| CPU | Ram | Flash | Network | USB | Serial | JTag |
|---|---|---|---|---|---|---|
| MIPS@360MHz | 64MiB | 16MiB | 4x 100M | Yes | Yes | ? |
NOT SUPPORTED by OpenWrt But check out http://freetz.org/
The Flash.Layout of OpenWrt does not apply here. It's one of these instead: http://wiki.ip-phone-forum.de/software:ds-mod:development:flash#flash_partitionierung
| Architecture: | MIPS32 |
| Vendor: | Lantiq |
| Bootloader: | EVA |
| System-On-Chip: | Texas Instruments UR8 |
| CPU/Speed | MIPS 4KEc Ver.? @ 360 Mhz |
| xDSL: | C62x@360MHz (part of UR8) + VINAX-CPE PEB 83000 E V1.3 & TNETD 7531ZDW |
| VoIP: | C55x@180MHz (part of UR8) |
| Flash-Chip: | ? |
| Flash size: | 16384 KiB |
| RAM: | 64 MiB |
| Wireless: | Atheros AR5416 |
| Ethernet: | TANTOS-0G = Infineon PSB 6970 HL V1.2 |
| Internet: | yes, 1x up to VDSL2 |
| Telephone: | Analog: 2x FXO, 2x FXS, ISDN S0: 1 x ext., 1 x int. |
| USB: | Yes 1 x 2.0 |
| Serial: | Yes |
| JTAG: | Yes |
How to connect to Serial Port
How to connect to JTAG interface, and how to reflash the device with JTAG tools