This are read only contents of the former OpenWrt wiki system. The pages are provided for archival purposes only. Refer to https://openwrt.org/ for up-to-date information.
toh:cloudengines:pogoplugpro
Table of Contents
CloudEngines Pogoplug Pro / V3
 | This page is work in progess! |
Supported Versions
| Version/Model | S/N | OpenWrt Version Supported | Model Specific Notes |
|---|---|---|---|
| Pogoplug Pro | - | trunk @ r43388 | - |
| Pogoplug V3 | - | trunk @ r43388 | - |
This page is for Oxnas / PLX targets.
Newer Pogoplugs have a different OpenWrt target: kirkwood Pogoplug E02
Oxnas trunk development history
Highlights
| CPU | Ram | Flash | Network | USB | Serial | JTag |
|---|---|---|---|---|---|---|
| PLX | 128 MiB | 128 MiB | 1 gigE | 4x 2.0 | Yes | ? |
Installation
Flash Layout
→flash.layout for explanations!
| Original FlashLayout | ||||
|---|---|---|---|---|
| mtd# | mtd0 | mtd1 | mtd2 | |
| start | ||||
| size | ||||
| in Bytes | ||||
| name | ||||
| file system | ||||
Installing with console access via serial connection
Here we describe howto install OpenWrt on the Pogoplug with the help of a serial connection to access the console.
:WIP: see other guides/blogpots
Installing bootloader
Installing rootfs
Factory firmware logs
OpenWrt boot logs
Tags
toh/cloudengines/pogoplugpro.txt · Last modified: 2017/06/18 12:28 by tmomas
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
