| Model | Version | SoC | CPU MHz | Flash MB | RAM MB | WLAN Hardware | WLAN2.4 | WLAN5.0 | 100M ports | Gbit ports | Modem | USB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Tiny AC | MediaTek MT7620A | 580 | 8 | 64 | MediaTek MT7620A + MT7610E | b/g/n | a/n/ac | - | 2 | No | 1x 2.0 |
→ Basic configuration After flashing, proceed with this.
Set up your Internet connection, configure wireless, configure USB port, etc.
The default network configuration is:
| Interface Name | Description | Default configuration |
|---|---|---|
| br-lan | LAN & WiFi | 192.168.1.1/24 |
| vlan0 (eth0.0) | LAN ports | None |
| vlan1 (eth0.1) | WAN port | DHCP |
| wlan0 | WiFi | Disabled |
→ hardware.button on howto use and configure the hardware button(s). Here, we merely name the buttons, so we can use them in the above Howto.
The Dovado TINY AC has the following buttons:
| BUTTON | Event |
|---|---|
| Reset | reset |
Note: This will void your warranty!
Remove 4 phillips screws underneath the router, and lift upper cover.
Main PCB:
→ port.serial general information about the serial port, serial port cable, etc.
How to connect to the Serial Port of this specific device:
| Serial connection parameters for Dovado TINY AC | 57600, 8N1 |
|---|